Thermostat with low insert (20 mm mounting depth) meeting the Ecodesign requirements. The thermostat is pre-programmed. Rated voltage 230 V AC ± 10% 50 Hz Output 1 no and connectors 1.5 mm² to 4 mm² Switching current 250 V AC / 16 (2) A, protection class II and protection class IP21. Operating temperature 0 ° C to 35 ° C and storage temperature -20 ° C to 70 ° C Clock Accuracy (at 20 ° C) <+/- 0.5 sec / min Power consumption (standby) <0.05 W Floor sensor NTC 10kΩ @ 25˚C and external control (EXT connector) 230V AC / 10µA (same phase).
Technical specification
Packing
Package: | 27/324 |
Unit: | PCS |
ETIM Data
Regulation type on/off: | Yes |
Regulation type modulating: | No |
Type of power supply: | Other |
Connection: | 3-/4-wire |
With receiver: | No |
Measuring range: | 5...35 °C |
External sensor: | Yes |
With thermal feedback: | Yes |
Suitable for heating: | Yes |
Number of heater outputs: | 1 |
Suitable for cooling: | No |
Selector switch for heating and heating with hot water: | No |
Sensor/feeler type: | Resistance sensor |
Temperature readable: | Yes |
Relative humidity (RH) readable: | No |
With display: | Yes |
Type of clock: | Week clock |
Clock model: | Digital |
Overtime switch: | No |
Optimisation: | Yes |
With tap water circuit: | No |
Operation: | Button |
Weather-dependent control system: | No |
Number of switching programmes: | 7 |
Contact type: | Normally open contact (NO) |
Degree of protection (IP): | IP21 |
Degree of protection (NEMA): | 2 |
Explosion-proof: | No |
Colour: | White |
RAL-number: | 9003 |
Width: | 71 mm |
Depth: | 71 mm |
Height: | 41 mm |
Class of the temperature control: | I |
Standby power consumption (solstandby): | 0.05 W |
Compatible with Apple HomeKit: | No |
Compatible with Google Assistant: | No |
Compatible with Amazon Alexa: | No |
IFTTT support available: | No |